Instructions
1 Remove the screw bolts holding the front bumper cover in place with either a socket wrench or a screwdriver, and pull the cover down.
2 Remove the bolts holding the headlamp assembly in place with a socket wrench. Remove the headlight housing assembly
3 Remove the retaining clip on the headlamp washer hose by pinching both ends of the clip together and pulling it back on the hose. You may need a pair of pliers to help you pinch the clip together. Pull the headlamp washer hose off.
4 Unplug the electrical connector running to the headlight assembly.
5 Unbolt the headlight washer motor unit and pull it out.
6 Install the new headlight housing unit. Installation is the reverse of removal.
Nie ma wyjścia demontować trzeba