Install the cylinder head and install new cylinder head retaining bolts
and washers.
Stage 1: tighten to 30 Nm.
Stage 2: tighten 90 degrees.
Stage 3: loosen 360 degrees.
Stage 4: tighten to 30 Nm.
Stage 5: tighten 90 degrees.
Stage 6: tighten 90 degrees .
![](http://naforum.zapodaj.net/thumbs/06438f6b0aa3.png)
LUB tutaj z podziałem na strony, momenty takie same.
LH cylinder head:
![](http://naforum.zapodaj.net/thumbs/fa41da63ddfe.png)
RH:
![](http://naforum.zapodaj.net/thumbs/043c78dc62f7.png)
Nie wiem skąd taka różnica ale to drugie raczej bardziej prawdziwe. Oba rysunki z oryginalnej książki naprawowej