Dział Techniczny > XF (2008 - obecnie)
3.0d nie widzi kluczyka, nie odpala
ajtotal:
tu Ci wyszukalem podpowiedz:
Hello everyone ,
Sorry for delay guys , I was away, that's why I couldn't answer
some times Jaguar XF X250 lost all immo-data and VIN+synchronisation between KVM-BCM and VIM when disconnecting battery .
In this case you have :
1= using SDD and Run immobilisation under service tab it will synchronise all modules , if not succeed and you get (failed to write securite target identifer ) in this case you have to step :
2= remove BCM read eeprom + d-flash , make it virgin (eep+dflash) and configure with SDD , relearn smart keys and re-configure PDM and DDM and all will be ok .
PS:you have to use SDD Last Update and Calibration files to succeed
hope all is clear
https://www.jaginfo.org/threads/front-cjb-repair.110272/
Specu90:
Dzięki, wychodzi na to że nie dam rady - nie mam plików do kalibracji .... musiałbym mieć wersję online sdd
ajtotal:
jezeli masz wersje offline to rowniez powinienes miec pliki do kalibracji.
Zyg zag:
Hej
i to sa skutki uzywania piratow,
przycholuj, tylko wczesniej odezwij sie tel ...
sprobuje uruchomic,
Pozdr
Nawigacja
Idź do wersji pełnej